Wedge Anchor and How to Install Wedge Anchor

Updated: Dec 14, 2018



Step 1

Using the proper drill bit size, drill a hole into the base material to the required depth. The tolerances of the drill bit used should meet the requirements.


Step 2

Remove dust and debris from the hole, using a hand pump, compressed air or a vacuum to remove loose particles left from drilling.


Step 3

Position the washer on the anchor and thread on the nut. If installing through a fixture, drive the anchor through the fixture into the hole. Be sure the anchor is driven to the minimum required embedment depth.


Step 4

Tighten the anchor with a torque wrench by applying the required installation torque, Tinst.




  • Black Google+ Icon
  • Black LinkedIn Icon
  • Black Facebook Icon
  • Black Instagram Icon
  • Black Blogger Icon
  • Black YouTube Icon

©2008-2019 created by Darmit Community Co.,Ltd.

  • Grey LinkedIn Icon